Piecha design Japan official website
Wheel Spacers & Wheel Bolts
- Suspention
- HOME > Tuning Parts >
Wheel spacers without integrated grease cap
Wheel spacers without integrated grease cap
Wheel spacers without integrated grease cap are for vehicles with flat wheel hub needs. , you can both at the front as well as on the rear axle are used. The track plates have a hub centering and so make optimum rim centering. The wheels are then optimally in the wheel arches. Select the following list your vehicle and determining the optimal wheel spacers for your tires.
The following pieces of information are required:
- Rim width - eg 7.5 x 18
- Offset - eg ET 35
- Tyres - eg 225/35 R18
- Vehicle type - eg CLK-Class
- Vehicle Code - A / C 209
Vehicle assignment list
| Fahrzeugklasse | Fahrzeug-Code | Spurverbreiterung |
|---|---|---|
| C-Klasse | W204 | Report [131 KB] |
| CLK Cabrio / Coupe | A / C 209 | Report [64 KB] |
| CLS | C 219 | Report [144 KB] |
| CLS | C 218 | Report [179 KB] |
| E-Coupé / Cabrio | A / C 207 | Report [150 KB] |
| M-Klasse | ML 164 | Report [149 KB] |
| SLK Roadster | R 171 | Report [63 KB] |
| SLK Roadster | R 172 inkl. SLK 55 AMG | Report [59 KB] |
| SL Roadster | R 230 | Report [59 KB] |
| SL Roadster | R 231 | Report [81 KB] |
|
ML Klasse GL-Klasse R-Klasse |
W 164 X 164 R 251 |
Report [149 KB] |
| Vito / Viano | W 639 | Report [118 KB] |
The following pieces of information are required:
Shank length of the current wheel bolts measured up to collar
+ Distanzscheibensärke = new Radschraubenlänge
thread strength observed M12 or M14
Please the wheel bolts (10 pieces per axis) order separately under the following statement:
thread strength (thread pitch is always 1.5)
thread length
collar design (domed-MB or 60 ° taper seat-60)